Recent content by Snout

  1. Snout

    2D stand I came up with.

    Say, that looks great! Good idea to add the roof - I probably wouldn't have thought of that.
  2. Snout

    Autotune - AW-1520H V2 & Smokin It #2

    Hopefully you can get some clarification. FWIW I found Auber customer service to be pretty responsive. "How do the temps hold with your AT the way you tune it?" When I used the "free hanging" temp probe clipped to a rack the temps were within +- 5 degrees or so. This weekend I installed a...
  3. Snout

    Autotune - AW-1520H V2 & Smokin It #2

    I have a #2 with an Auber controller. It's a separate stand-alone controller (not one that comes pre-installed with the digital smokers) so I can't speak to the SI manual's instructions. With mine I just load the cook chamber with bricks or whatever and kick off the autotune sequence. My...
  4. Snout

    Left and Right Auber Windows showing -H-

    I don't know if this has been covered elsewhere but my first thought would be to swap the probes to see if anything changes. I would think that if the box temp probe had failed then the element wouldn't be commanded on - otherwise the element would be running continuously.
  5. Snout

    Pre heating a Modle 2

    I found that the instructions are a bit confusing regarding preheating. I don't think that there is a technical reason for not preheating (meaning that preheating probably won't damage the smoker) but rather the consensus seems to be that smoke penetration is better when you start with a cold...
  6. Snout

    Auto tune clarification

    I know this is an old thread but I thought I'd add this in case someone comes across this in the future: As far as I know, the values are in tenths of an hour (not very intuitive, I know). A value of 0.1 would be six minutes; 0.5 would be 30 minutes. So to answer the question: 0.5 time means...
Back
Top