Smokin-It User Forum!

Auber PID Controllers => Auber PID Tips and Tricks => Topic started by: TheSneakyZebra on November 30, 2014, 04:29:10 PM

Title: Auber Ahi
Post by: TheSneakyZebra on November 30, 2014, 04:29:10 PM

When the Auber starts flashing Ahi on the temp portion. What does that mean? Does it mean temp is too high? I have it set at 300 with it bypassed....

Title: Re: Auber Ahi
Post by: DivotMaker on November 30, 2014, 06:06:22 PM

It means your high temp alarm is set too low.  I believe the default is 275.  I think the hi/low temp alarms are under lock code 66, but you might want to check your manual.  Set the hi temp to 350 and you should be good (probe 1).