Smokin-It User Forum!
Smokin-It Smokers => Model 3 & 3D - The Big Brother => Topic started by: prudentsmoker on July 02, 2023, 07:31:53 AM
-
Does it sound like I need a new element?
-
Maybe. How full was your smoker? Tonight, after is it dark, fire up your smoker without the woodbox. It the element bright and uniform? Any dark spots and a new element is called for. You can also test the element as shown in this link:http://www.appliance411.com/faq/test-element.shtml
-
Thanks. I will try that tonight. It wasn't very full.
-
This is embarrassing. While I was only doing two pork tenderloins, I had them in a large pan. Apparently a little too large. Anyway, I fired it up without the pan and it worked just fine. File this one under "Lessons Learned".
-
All's well that ends well!
-
Thanks for posting the testing link on the element. Last month, while smoking 4 pork butts, I woke up to a holding oven basically. No glow on the element. I need to test the element still, but I’m pretty sure it’s done. The Auber unit turns on/off when powered, just no heat.
I’m not the most mechanically sound person, is replacing the element fairly straight forward? I found another page displaying the steps to take the back off and such. Seems like it’s easy enough?
-
I changed the element on my #2 a few years ago and it was pretty easy. If I can do it, anybody can! Good luck!