Author Topic: Cooking on my 3.5D  (Read 7975 times)

Toyse

  • Newbie
  • *
  • Posts: 15
Cooking on my 3.5D
« on: April 23, 2017, 10:33:39 PM »
I was not happy with my current smoking setup,(pellet burner) and I decided that I needed an upgrade . I was not getting consistent results with nor the favor .
I researched and almost bought a competitor's smoker but by chance I saw a Smoking-it 3.5D and it was larger Plus it had all the items that I was going have to buy for the other.
I ordered one and received it on Friday before Easter and that is when the fun began .

I cooked a Ham Saturday for Easter.. Everyone Raved about it .

I cooked Ribs and Brussel Sprouts Sunday .. Everyone Raved about them .

Monday I cooked my Pork Belly Bacon that had Just came out of the Brine ..

Tuesday I cooked Chicken Thighs .. the Most Moist and Tender I have ever made .

Wednesday I cooked Baked Beans.. Very Flavorful

Thursday I cooked spatchcocked chicken.. Wow it was tender and Juicy .

Saturday I cooked a Packer Brisket .. Wow Wow .. Even my son-in-law was Impressed as he has a Cookshack Smoker and he said I out did his ..

Tonight which is Sunday I am smoking Cabbage and I am sure it Will be Great ..

I am very Impressed with the Quality of the Smoker Build and the easy of use...It is making me Look like a BBQ expert ..

I look forward the the Long cooking relationship with my 3.5D and the flavors that we are going to Create as we can experiment and know that I can get consistent and repeatable results from my 3.5D .

I am Sold ..






 

MTSmokin

  • Newbie
  • *
  • Posts: 13
Re: Cooking on my 3.5D
« Reply #1 on: April 23, 2017, 11:11:30 PM »
I was not happy with my current smoking setup,(pellet burner) and I decided that I needed an upgrade . I was not getting consistent results with nor the favor .

This sounds like my story except I ordered a 3D and mine didn't show up till Monday after Easter.

So far my results haven't been as good as yours but I know I can dial it in and the smoke flavor is much better than my Traeger.  Keep up the comments, it's encouraging :)
Mark in the northern BBQ desert

3D, Traeger, Weber gas & charcoal
In search of great BBQ without working all day or night to get there

Toyse

  • Newbie
  • *
  • Posts: 15
Re: Cooking on my 3.5D
« Reply #2 on: April 24, 2017, 09:21:45 AM »
So far my results haven't been as good as yours but I know I can dial it in and the smoke flavor is much better than my Traeger.  Keep up the comments, it's encouraging :)

Yes the flavor is better than my Traeger ..
I see not all my photos uploaded I will try again when I get home tonight ..
My Smoke Cabbage was good but not completely done, (soft), but that was my fault I pulled it at 3.5 hours and it really needed to go for couple more.

MTSmokin what Kind of problems are you having ?

-Toyse

old sarge

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4046
Re: Cooking on my 3.5D
« Reply #3 on: April 24, 2017, 09:51:45 PM »
Mark - Keep on smoking. You'll get your 3D dialed in to your liking and taste.
David from Arizona
US Army 70 - 95
SI 3D & Big Red Controller
CS 066
Lodge Sportsman Grill
Weber Kettle
Ducane Meridian 42 inch Grill
LEM MaxVac 1088A
LEM Big Bite #8 Grinder
Chef's Choice 665 and Rival Slicers
Old Hickory Knives
InstantPot Duo80 Plus

jcboxlot

  • Hero Member
  • *****
  • Posts: 1063
  • John, York PA.
Re: Cooking on my 3.5D
« Reply #4 on: April 24, 2017, 10:38:32 PM »
All sounds off to a great start.   

I'm curious if there is a recipe for the cabbage or you just throw it in?  1/4 chunks or slaw diced?   

That's now on my list.     
Smokin It #2.  Weber Genesis. Old Smokey charcoal.  Work from home antique tool dealer and living the dream.  Dad, Husband, Cook.  John~York PA

Toyse

  • Newbie
  • *
  • Posts: 15
Re: Cooking on my 3.5D
« Reply #5 on: April 25, 2017, 05:50:44 AM »
All sounds off to a great start.   

I'm curious if there is a recipe for the cabbage or you just throw it in?  1/4 chunks or slaw diced?   

That's now on my list.   
I cut the core from the center and stuffed the center with 1 stick of butter and bacon. This time I placed it in an aluminum pan with a little water in the bottom, put it in the smoker for 3 hours at 275 then put aluminum foil over the top for an 1/2 hour . It really should went another 1 1/2 hours with foil over the top .
« Last Edit: April 25, 2017, 05:52:20 AM by Toyse »

Toyse

  • Newbie
  • *
  • Posts: 15
Re: Cooking on my 3.5D
« Reply #6 on: April 25, 2017, 06:00:34 AM »
The Pictures that did not upload.
« Last Edit: April 25, 2017, 06:02:37 AM by Toyse »

BedouinBob

  • Hero Member
  • *****
  • Posts: 1276
  • Let's Smoke Meat!
Re: Cooking on my 3.5D
« Reply #7 on: April 25, 2017, 09:36:32 AM »
Nicely done! I've never tried cabbage.....sounds interesting.
Bob - Colorado Springs
NRA & USN

Toyse

  • Newbie
  • *
  • Posts: 15
Re: Cooking on my 3.5D
« Reply #8 on: April 30, 2017, 11:54:10 AM »
Here is the Pork Shoulder I started Friday night at 5:15pm and I finished at 7:30am Saturday .
I coated it with mustard the night before and put into my square pan, added apple cider, then cooked until internal temperature was 205 with the PID's Probe and it came out pull apart yum .

-Toyse

 
« Last Edit: April 30, 2017, 11:56:52 AM by Toyse »

old sarge

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4046
Re: Cooking on my 3.5D
« Reply #9 on: April 30, 2017, 07:42:29 PM »
One tasty looking butt.
David from Arizona
US Army 70 - 95
SI 3D & Big Red Controller
CS 066
Lodge Sportsman Grill
Weber Kettle
Ducane Meridian 42 inch Grill
LEM MaxVac 1088A
LEM Big Bite #8 Grinder
Chef's Choice 665 and Rival Slicers
Old Hickory Knives
InstantPot Duo80 Plus

MTSmokin

  • Newbie
  • *
  • Posts: 13
Re: Cooking on my 3.5D
« Reply #10 on: April 30, 2017, 10:07:04 PM »
Here is the Pork Shoulder I started Friday night at 5:15pm and I finished at 7:30am Saturday .
I coated it with mustard the night before and put into my square pan, added apple cider, then cooked until internal temperature was 205 with the PID's Probe and it came out pull apart yum .

-Toyse

What temperature  did you cook at?  I just did a 9 lb bone in shoulder at 225.  I put it in at noon on Friday and took it out at 6:00 PM Saturday (30 hours!) and it had only made it to 194.  I couldn't believe it took that long so I probed it in many places with my thermal pen and found that the temperature was consistently between 193 and 196 through the whole thing.

It tasted good and was tender but 30 hours in crazy!
Mark in the northern BBQ desert

3D, Traeger, Weber gas & charcoal
In search of great BBQ without working all day or night to get there

Toyse

  • Newbie
  • *
  • Posts: 15
Re: Cooking on my 3.5D
« Reply #11 on: May 03, 2017, 03:13:57 PM »
I cooked it at 225 and at 12hrs in it stalled at 194 and took another 2hrs to get to the 205 with the PID's Temperature probe . My Smoke's probe showed 197 in a different section of the shoulder . When I pulled it I wrapped it with foil and then cling wrap and set it in the oven to rest .

30 hours is a very long time ..

-Toyse




rprichard

  • Newbie
  • *
  • Posts: 1
Re: Cooking on my 3.5D
« Reply #12 on: May 19, 2017, 07:33:04 AM »
I have traditionally smoked pork shoulders/butts about 6-8 hours at low heat (200º), then wrapped in aluminum foil, placed on a tray, and transferred them to my kitchen oven to finish them at 300ºF until the internal temp reaches 200º. I pull them, let them rest and the meat will fall apart. The downside of this technique is the hard bark is softened a bit because you are wrapping them in the AL which keeps the moisture inside.

From everything I've read over the past 15 years, there is that there is a "point of diminishing returns" where additional time in the smoker has little, if any, impact to the final flavor other than raising the temperature of the meat.

old sarge

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4046
Re: Cooking on my 3.5D
« Reply #13 on: May 19, 2017, 11:36:30 AM »
Here are some links that may help explain the stall, smoke absorption and the like.  Lengthy reads to be sure, but good information.

http://smokinitforums.com/index.php?topic=4258.msg38347#msg38347
http://amazingribs.com/tips_and_technique/the_stall.html
http://amazingribs.com/tips_and_technique/zen_of_wood.html
David from Arizona
US Army 70 - 95
SI 3D & Big Red Controller
CS 066
Lodge Sportsman Grill
Weber Kettle
Ducane Meridian 42 inch Grill
LEM MaxVac 1088A
LEM Big Bite #8 Grinder
Chef's Choice 665 and Rival Slicers
Old Hickory Knives
InstantPot Duo80 Plus

Durangosmoker

  • Hero Member
  • *****
  • Posts: 535
Re: Cooking on my 3.5D
« Reply #14 on: May 20, 2017, 01:39:53 PM »
I'm curious why you cooked it in a pan. When I do one, I put the meat straight on the rack, figuring that it gets heat and smoke from all sides that way.
Eric in New York's Hudson Valley, unless I can get out to Durango.
SI #1 in Durango, #2 in NY, and thinking about a 3D.