Author Topic: 3D WI-FI Factory Reset  (Read 130 times)


  • Newbie
  • *
  • Posts: 1
3D WI-FI Factory Reset
« on: January 01, 2022, 04:53:29 PM »
After working flawlessly for two years, my WI-FI is acting up.  (Certainly, it canít be me!). I can not log in. The blue light on the unitís control is flashing once a second. Have unplugged it, waited 15-20 seconds and plugged it back in. Still blue light blinks every second. Repeated it. How do I perform a factory reset from the red control box; am thinking that might help. And needless to say, any other suggestions would be appreciated. Thanks, Jim


  • Hero Member
  • *****
  • Posts: 913
  • 3DW - San Jose, CA
Re: 3D WI-FI Factory Reset
« Reply #1 on: January 01, 2022, 06:26:29 PM »
Factory Reset - This function will restore all the parameters (including all the stored recipe settings in the memory) back to
the factory default values. This setting will not reset the WiFi configuration. To reset the WiFi setting on the controller,
please press and hold SET key and TIME key for five seconds, until the blue WiFi indicator starts to blink.
See where the Smokin-It Forum Members are located:  -- Message me to be added...