Author Topic: 4D Cover  (Read 1205 times)

Jhrol2862

  • Jr. Member
  • **
  • Posts: 45
4D Cover
« on: October 24, 2020, 10:03:27 AM »
Will the standard cover fit OK on a 4D-WiFi with the smoke generator still attached to the door? 

Thanks in advance.
John from Indiana

old sarge

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3648
Re: 4D Cover
« Reply #1 on: October 24, 2020, 06:46:45 PM »
You may need to send Steve an email for that question.
David from Arizona
US Army 70 - 95
SI 3D & Big Red Controller
CS 066
Lodge Sportsman Grill
Weber Kettle
Ducane Meridian 42 inch Grill
LEM MaxVac 1088A
LEM Big Bite #8 Grinder
Chef's Choice 665 and Rival Slicers
Old Hickory Knives
InstantPot Duo80 Plus

Jhrol2862

  • Jr. Member
  • **
  • Posts: 45
Re: 4D Cover
« Reply #2 on: October 24, 2020, 07:26:28 PM »
I asked him when he delivered my smoker and he said he wasnít sure.  Iím going to try it tomorrow.  Thanks.
John from Indiana

old sarge

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3648
Re: 4D Cover
« Reply #3 on: October 24, 2020, 09:31:15 PM »
The covers are just loose enough to got on the smoker easily. Somehow I doubt it will fit over the smoke generator.
David from Arizona
US Army 70 - 95
SI 3D & Big Red Controller
CS 066
Lodge Sportsman Grill
Weber Kettle
Ducane Meridian 42 inch Grill
LEM MaxVac 1088A
LEM Big Bite #8 Grinder
Chef's Choice 665 and Rival Slicers
Old Hickory Knives
InstantPot Duo80 Plus

Lonzinomaker

  • Hero Member
  • *****
  • Posts: 389
Re: 4D Cover
« Reply #4 on: October 24, 2020, 11:17:02 PM »
Based on my #3 and the Smokin-It cover for it, I would say it may not fit.  My cover is very tight. I don't know if Smokin-It has changed designs since I bought mine several years ago.
Dave
Smokin-It #3 main smoker.
1400 Smokin Tex (same size as #2) for Snowbird time.
Smokin-It #1 for camping trips.
Big Chief with mailbox mod for cheese smoking
Blackstone 22in griddle with Bakerstone pizza oven
Spokane, WA

Jhrol2862

  • Jr. Member
  • **
  • Posts: 45
Re: 4D Cover
« Reply #5 on: October 25, 2020, 09:29:08 PM »
Maybe the model 5 cover would work. I see no reason to change the door back and forth depending on when I use the cold smoke generator just to be able to cover it.
John from Indiana

barelfly

  • Hero Member
  • *****
  • Posts: 933
Re: 4D Cover
« Reply #6 on: October 25, 2020, 09:49:16 PM »
Iím not sure if you have one already or not, but coversandall.com makes great covers! And custom made, so you could send them measurements for what you are looking for. I donít know what the cost of the cover you are looking at, but coversandall are usually around $70. I have three of these, and my dad has two. They are really good and hold up, being sunbrella material/fabric.

Just a thought.
Jeremy in NM
3D for lazy q
Bullet 4 burner gasser by Bull Grills
Weber Kettle with a Slow n Sear

Jhrol2862

  • Jr. Member
  • **
  • Posts: 45
Re: 4D Cover
« Reply #7 on: October 27, 2020, 06:36:51 AM »
I will keep that in mine.  Thank you.
John from Indiana

OldeSmoker

  • Hero Member
  • *****
  • Posts: 252
Re: 4D Cover
« Reply #8 on: October 27, 2020, 03:19:44 PM »
I have a 3DW and my cover fits fine over the smoker and Bella's cold smoke generator.
Paul from Southwest Missouri
*Smokin-It 3D-WiFi
with Bellaís CSG and The Stephanie Cabinet
*Members Mark SS 6 Burner Gas Grill with Sear Burner, Side Burner & Rotisserie
*River Grills Wood Fired Grill and Fire Pit
W/ Rotisserie and Dutch Oven Hanger

Jhrol2862

  • Jr. Member
  • **
  • Posts: 45
Re: 4D Cover
« Reply #9 on: November 08, 2020, 10:42:09 PM »
Do you leave the cold smoker attached to the door at all times?  I bought the extra door predrilled and setup for the cold smoker and donít want to be changing the door back and forth depending on if Iím hot or cold smoking.
John from Indiana

OldeSmoker

  • Hero Member
  • *****
  • Posts: 252
Re: 4D Cover
« Reply #10 on: November 08, 2020, 11:16:48 PM »
I leave the cold smoke generator on at all times. I donít have any problem with the cover fitting.
Paul from Southwest Missouri
*Smokin-It 3D-WiFi
with Bellaís CSG and The Stephanie Cabinet
*Members Mark SS 6 Burner Gas Grill with Sear Burner, Side Burner & Rotisserie
*River Grills Wood Fired Grill and Fire Pit
W/ Rotisserie and Dutch Oven Hanger

Jhrol2862

  • Jr. Member
  • **
  • Posts: 45
Re: 4D Cover
« Reply #11 on: November 09, 2020, 08:50:05 AM »
Awesome. Thanks.  I actually bought the Model 5 cover to make sure if would fir over the cold smoker.  Guess I didnít have to from what your saying.
John from Indiana