Author Topic: Need suggestions/ideas for a deer ham  (Read 5874 times)

NVW-SSV

  • Full Member
  • ***
  • Posts: 99
Need suggestions/ideas for a deer ham
« on: December 30, 2015, 03:22:21 PM »
Going to smoke a deer ham/rear leg quarter and I'm needing some advice on how to make it work - - - Already have decided to use DM's brine for at least 12-15 hours and what I'm really needing is advice on 1) cook temperature(?), 2) cook-until- INTERNAL temperature(?), and (3) what type of rub would be best?

This is going to be for a family gathering in about a week, and the deer is a 12/2015 harvest, only in the freezer for about 30 days total.  Probably will have to trim to get it in the #2 diagonally, weighs in at about 14.5 lbs

THANKS for your help.....


A$$-MAN
Jody from western NC

Smokin' It #2 - Auber 1200 & bypassed
3.5D Wifi (07/18)

Joe Rinaldi

  • Jr. Member
  • **
  • Posts: 42
Re: Need suggestions/ideas for a deer ham
« Reply #1 on: March 06, 2016, 05:00:01 PM »
Jody, did you have any luck the hind quarter? 
Weber 22 Performer
Traeger Texas Elite
Smokin-It 4D
Joe
Lovettsville VA

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Need suggestions/ideas for a deer ham
« Reply #2 on: March 09, 2016, 07:20:12 PM »
I bet Brian, Walt or Greg will really be able to help here!
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

Pork Belly

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1812
Re: Need suggestions/ideas for a deer ham
« Reply #3 on: March 09, 2016, 07:59:12 PM »
Good idea to brine to add moisture and flavor but I would avoid curing salt. Curing salt will really change the texture of venison. Completely cured through it might not be bad but what you are likely to get is an extra firm outer cured edge. Stick with kosher, sugar, spices, garlic etc.

After the brine pat it dray, poke random slits in it and add small pieces of bacon, extra bacon can be laid on top. Remember there is no fat in that meat.

Go 225'ish until an IT of NO MORE than 135 at the thickest point. The meat needs to be pink or you ruined it.

Should be good hot and fantastic cold sliced thin for sandwiches.

I have done these before but prefer to break down leg quarters and do other things with the different muscle groups. Every hunter should roast or smoke at least one leg to know how and experience a leg of beast.
« Last Edit: March 09, 2016, 09:47:23 PM by Pork Belly »
Brian - Michigan-NRA Life Member
"A fear of weapons is a sign of retarded sexual and emotional maturity."
- Sigmund Freud

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Need suggestions/ideas for a deer ham
« Reply #4 on: March 09, 2016, 08:14:08 PM »
Winner-winner, chicken dinner!  Take that to the bank, Jody - Brian's "The Man" when it comes to smoking anything, but especially some of the unusual ones (not that your venison is unusual, just not that common).
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

NDKoze

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3008
  • Gregg - Fargo, ND
Re: Need suggestions/ideas for a deer ham
« Reply #5 on: March 09, 2016, 11:09:15 PM »
It has been years since I cooked a venison roast. But the key is to not overcook them. I used to marinate my roasts in Italian Dressing.

Now days we grind all of our deer and make sausage products out of ours. I'm going to be smoking 50lbs of snack sticks this weekend. Should be fun.

Good luck with your roast.

Gregg - Fargo, ND
Smokin-It #3 (purchased in 2014) that replaced a Masterbuilt XL (ugh) and a 10+ Year-Old Big Chief (still used for fish), and few others over the years, along with variety of Weber Gas/Charcoal Grills, Anova Sous Vide, etc. devices.

NVW-SSV

  • Full Member
  • ***
  • Posts: 99
Re: Need suggestions/ideas for a deer ham
« Reply #6 on: March 10, 2016, 06:40:00 AM »
Sorry to be so late with a response, YES.... It turned out really well, I cooked at 225F for almost 12 hours until 141F internal and it tastes like roast beef and has made the best sandwiches ever.

DM's brine for 18 hours, EVOO and Jim Baldridge's seasoning.... Before and after pics
« Last Edit: March 10, 2016, 06:43:04 AM by NVW-SSV »
Jody from western NC

Smokin' It #2 - Auber 1200 & bypassed
3.5D Wifi (07/18)

NDKoze

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3008
  • Gregg - Fargo, ND
Re: Need suggestions/ideas for a deer ham
« Reply #7 on: March 10, 2016, 12:55:39 PM »
Nice Job!
Gregg - Fargo, ND
Smokin-It #3 (purchased in 2014) that replaced a Masterbuilt XL (ugh) and a 10+ Year-Old Big Chief (still used for fish), and few others over the years, along with variety of Weber Gas/Charcoal Grills, Anova Sous Vide, etc. devices.

NVW-SSV

  • Full Member
  • ***
  • Posts: 99
Re: Need suggestions/ideas for a deer ham
« Reply #8 on: March 10, 2016, 02:10:52 PM »
Next time I'll definitely wrap in bacon and try 135*F or so
Jody from western NC

Smokin' It #2 - Auber 1200 & bypassed
3.5D Wifi (07/18)

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Need suggestions/ideas for a deer ham
« Reply #9 on: March 10, 2016, 07:17:53 PM »
Looks good!
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

NVW-SSV

  • Full Member
  • ***
  • Posts: 99
Re: Need suggestions/ideas for a deer ham
« Reply #10 on: March 10, 2016, 08:31:00 PM »
Thanks again for the help, folks.  This smoke was extra special because:

This was a deer that my father killed from a ground blind in 12/2015.  Only reason he was in a ground blind is......about 90 days prior to this deer being harvested, he took a fall from about 16 feet, while attaching a ladder stand.  He broke his collarbone, fractured the same vertebrae that he had fused about 1.5 years earlier, and broke a few ribs.

Tough guy killed THIS deer (ham) with his soft collar on, about 60 days after surgery to put rods and screws in that broken (neck, really) upper vertebrae area.  Not bad for a 65 year old man. 

Jody from western NC

Smokin' It #2 - Auber 1200 & bypassed
3.5D Wifi (07/18)

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Need suggestions/ideas for a deer ham
« Reply #11 on: March 10, 2016, 08:57:17 PM »
Jody, your Dad's a stud.  Kudos for coming from the generation when men were men. 8)
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!