« previous next »
Pages: [1]

Author Topic: Grilling mesh!  (Read 3775 times)

Rich B

  • Full Member
  • ***
  • Posts: 60
Grilling mesh!
« on: March 13, 2015, 07:54:24 AM »
Just poking around online I ran across this interesting item at Bed, Bath and Beyond - http://www.bedbathandbeyond.com/store/product/non-stick-grilling-mesh/1041403006?

Looks like it would be perfect for jerky, fish, nuts etc... on top of a regular grate.  it's 13.5 x 18 so not quite full size for a #3 and it appears that you could cut it if needed without destroying it to fit a #2.  there's only 2 reviews and one of them did say it was used in a smoker.  for $14 (less the never ending supply of %20 off coupons would make it around $11) seems like it would be a handy accessory.  Still waiting for the #3's to be back in stock so obviously I haven't tried one yet but I plan on it.  Anyone else try something like this?

Logged
Rich from S.E. MI, and summers in the thumb!
#3 (soon to be a 3D after I upgrade) at the lake
#1 at home
Weber Gas Grills at both locations

NDKoze

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3008
  • Gregg - Fargo, ND
Re: Grilling mesh!
« Reply #1 on: March 13, 2015, 11:28:07 AM »
#3s are back in stock. I just did a test to see if I could add one to my cart and I could.

Go get one. ;)
Logged
Gregg - Fargo, ND
Smokin-It #3 (purchased in 2014) that replaced a Masterbuilt XL (ugh) and a 10+ Year-Old Big Chief (still used for fish), and few others over the years, along with variety of Weber Gas/Charcoal Grills, Anova Sous Vide, etc. devices.

Rich B

  • Full Member
  • ***
  • Posts: 60
Re: Grilling mesh!
« Reply #2 on: March 13, 2015, 12:14:24 PM »
Yup, just placed my order for #3, cart and a bunch of accessories, will be driving in to pick up next week....
Logged
Rich from S.E. MI, and summers in the thumb!
#3 (soon to be a 3D after I upgrade) at the lake
#1 at home
Weber Gas Grills at both locations

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Grilling mesh!
« Reply #3 on: March 15, 2015, 01:34:02 PM »
The grilling mesh you show is pretty pricey.  You can get the same stuff, in bulk, from amazenproducts.com - they call it Q-Matz.  I have it, and it works great.  Cut to fit, and you can get it by the foot in 18" or 24" width.

Q-Matz
Logged
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

aspenextreme03

  • Full Member
  • ***
  • Posts: 76
Re: Grilling mesh!
« Reply #4 on: March 15, 2015, 02:40:07 PM »
Divot,

Do you use the qmatz for each smoke or just for fish and stuff like that??
Logged
Eric from Marietta, GA
Smokin-It Model 2, Weber Genesis & Blackstone Pizza Oven

SuperDave

  • Hero Member
  • *****
  • Posts: 2782
  • Officially Retired
Re: Grilling mesh!
« Reply #5 on: March 15, 2015, 05:23:11 PM »
How well does that stuff clean up?  It looks good for fish or jerky. 
Logged
Model 4, Harrisville, Utah

jbauch357

  • Sr. Member
  • ****
  • Posts: 124
Re: Grilling mesh!
« Reply #6 on: March 16, 2015, 01:57:48 PM »
I was looking for the same and found what looks like a Rec Tec knock off - for 1/3 the price if you order a few of them and break the price of shipping down.

http://smile.amazon.com/dp/B00DTIUG36

They'll be arriving this week, and hopefully I'll be able to use them this weekend and provide feedback on how well they worked.
Logged
Josh - Western Washington (hell)

paidin

  • Sr. Member
  • ****
  • Posts: 175
Re: Grilling mesh!
« Reply #7 on: March 16, 2015, 09:08:16 PM »
I bought the Q-matz back when I had the MES40.  Good price and worked great.  Cleaned well too.
Logged
the SI#4 should be named "The American" because you can do everything in excess with it.  Just because you can.  'Murica!

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Grilling mesh!
« Reply #8 on: March 18, 2015, 06:37:36 PM »
Quote from: aspenextreme03 on March 15, 2015, 02:40:07 PM
Divot,

Do you use the qmatz for each smoke or just for fish and stuff like that??

Just anything that will fall through the normal shelf.  Easy cleanup with soap and water.
Logged
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!
Pages: [1]
« previous next »