Smokin-It User Forum!

Auber PID Controllers => Auber PID Tips and Tricks => Topic started by: iamimdoc on June 05, 2022, 06:53:40 PM

Title: Problem solved re: Auber not getting to temp
Post by: iamimdoc on June 05, 2022, 06:53:40 PM
I have placed a few posts re inconsistent heating and not accurate ( not what I set Auber to) heating.

I believe the problem was my plug.  The plastic was broken and the wires were placed in the quick setup position (“backwiring” on back side) and not looped over the screws on the side for better connection.

Not I am within a few degrees of my set point and running at 25-50%.

Totally acceptable I think.

Anyway, if Auber not working as expected, check the electrical outlet or use another outlet to see if that fixes the issue.
Title: Re: Problem solved re: Auber not getting to temp
Post by: old sarge on June 05, 2022, 09:38:41 PM
Good to hear you have solved the problem. Also it is good that you have fixed your outlet from a safety aspect.
Title: Re: Problem solved re: Auber not getting to temp
Post by: barelfly on June 11, 2022, 08:43:40 AM
Glad you got your cooker working! Now lets see some cooks from that cooker!

Enjoy your weekend!