Author Topic: #1 Cover Size  (Read 5807 times)

afratki

  • Sr. Member
  • ****
  • Posts: 127
  • Owner: Smokin-It #1
#1 Cover Size
« on: May 31, 2013, 09:42:33 AM »
I purchased my #1 about two weeks ago and I finally got around to putting the cover I purchased with it on.

I noticed it overhangs the edges by a good two inches on all sides when viewing from the top. I'd think it would fit better than this given you order a cover for a specific model. Maybe I was sent #2 cover by mistake? Does anyone have a #1 with a Smokin-It cover they can comment on the fitment?

Edit: for a little more clarity I measured the smoker and the cover. The top of the #1 measures 15 x 19, the top panel of the cover measures 19 x 22.   
« Last Edit: May 31, 2013, 08:13:26 PM by afratki »
Andrew from Maryland

Let's Smoke!

old sarge

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4046
Re: #1 Cover Size
« Reply #1 on: May 31, 2013, 10:16:13 PM »
I think you got a larger cover.  Give Steve a call to verify.
David from Arizona
US Army 70 - 95
SI 3D & Big Red Controller
CS 066
Lodge Sportsman Grill
Weber Kettle
Ducane Meridian 42 inch Grill
LEM MaxVac 1088A
LEM Big Bite #8 Grinder
Chef's Choice 665 and Rival Slicers
Old Hickory Knives
InstantPot Duo80 Plus

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: #1 Cover Size
« Reply #2 on: June 27, 2013, 08:20:05 PM »
I have a #1 cover on the way - I'll post how mine fits, in case anyone's still wondering.
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

afratki

  • Sr. Member
  • ****
  • Posts: 127
  • Owner: Smokin-It #1
Re: #1 Cover Size
« Reply #3 on: June 28, 2013, 08:03:03 AM »
I actually have not followed up with Steve on this yet.  :-[

If you could post the measurements of the cover you receive that would be appreciated.
Andrew from Maryland

Let's Smoke!

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: #1 Cover Size
« Reply #4 on: June 28, 2013, 06:42:01 PM »
I actually have not followed up with Steve on this yet.  :-[

If you could post the measurements of the cover you receive that would be appreciated.

No problem at all!  Looks like it will be here next Wednesday (7/3).
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: #1 Cover Size
« Reply #5 on: July 08, 2013, 08:06:18 PM »
I received my #1 cover today - took a little longer due to a shipping foul-up that Steve promptly corrected!  The dimensions of the top are 16" x 20 1/4".  It fits the #1 like a glove.  Snug enough I don't think it will easily blow off, but loose enough to get on easy. 
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

afratki

  • Sr. Member
  • ****
  • Posts: 127
  • Owner: Smokin-It #1
Re: #1 Cover Size
« Reply #6 on: July 08, 2013, 08:41:08 PM »
Thanks Tony, you confirmed I received the wrong cover.
Andrew from Maryland

Let's Smoke!

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: #1 Cover Size
« Reply #7 on: July 08, 2013, 09:13:44 PM »
Glad to help! 8)
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!