Author Topic: 2 prime briskets  (Read 7143 times)

gmannel

  • Full Member
  • ***
  • Posts: 52
2 prime briskets
« on: July 16, 2015, 06:35:58 PM »
2 prime 12 pounders started in brine, tomorrow to inject w Butchers, rub w TexasBBQRub Original on one, Old # 2 on the other, then 225 w 6+ oz oak. No wrap, finish at 195, then wrap and rest. 1st brisket w/ the enlarged drain hole.
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

gregbooras

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2414
  • #3D Smoker
Re: 2 prime briskets
« Reply #1 on: July 16, 2015, 06:59:21 PM »
Sounds like a feast George!

Greg

Grampy

  • Hero Member
  • *****
  • Posts: 648
Re: 2 prime briskets
« Reply #2 on: July 16, 2015, 07:36:25 PM »
George, just out of curiosity why did you feel the need to enlarge the drain hole?
Jimmy from Arkadelphia, AR
Smokin-It #2
Woo Pig Sooie!

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: 2 prime briskets
« Reply #3 on: July 16, 2015, 07:58:21 PM »
Should be great!  Let us know how it performs with the bigger drain hole.
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

gmannel

  • Full Member
  • ***
  • Posts: 52
Re: 2 prime briskets
« Reply #4 on: July 17, 2015, 03:41:24 PM »
George, just out of curiosity why did you feel the need to enlarge the drain hole?

Wanted to increase airflow for better bark per prev poster "Airflow", plus placing the 1" nut under front of smoke box to keep it off the floor and blocking the hole.
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

gmannel

  • Full Member
  • ***
  • Posts: 52
Re: 2 prime briskets
« Reply #5 on: July 17, 2015, 03:43:04 PM »
Coming out of the brine now and rinse and then inject, pat dry, then rub , then in frig for a few hours to be started on #3 this evening
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

gmannel

  • Full Member
  • ***
  • Posts: 52
Re: 2 prime briskets
« Reply #6 on: July 17, 2015, 06:31:46 PM »
Injected, rubbed on pit. Does anyone else have an issue w most of the rub from the bottom 1/2 staying w the pan instead on the meat?
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: 2 prime briskets
« Reply #7 on: July 17, 2015, 08:35:38 PM »
Injected, rubbed on pit. Does anyone else have an issue w most of the rub from the bottom 1/2 staying w the pan instead on the meat?

Are you talking about when you apply it?  If you rub, right before going in the smoker, you should be able to do one side, flip, and do the top side pretty quick.  Then, immediately place the rubbed meat on a smoker shelf (I lay them on top of a cookie sheet, or foil).  If you let it sit for very long, on the foil, you will lose some rub on the bottom.
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

gmannel

  • Full Member
  • ***
  • Posts: 52
Re: 2 prime briskets
« Reply #8 on: July 18, 2015, 09:14:05 AM »
Rub applied hours in advance like commonly posted
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

gmannel

  • Full Member
  • ***
  • Posts: 52
Re: 2 prime briskets
« Reply #9 on: July 18, 2015, 11:55:22 AM »
11 hrs - Maverick dual probe said 196, 349!! Instaread said 201 for middle shelf and 186 for upper shelf, so pulled lower one, like jello, and left upper one on til 201 and pulled, again like jello. Somewhere, here or amazingribs.com or one of the many other bbq sites I read 'something magic happens at 200-202 deg'
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

gmannel

  • Full Member
  • ***
  • Posts: 52
Re: 2 prime briskets
« Reply #10 on: July 18, 2015, 01:11:50 PM »
Point
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

gmannel

  • Full Member
  • ***
  • Posts: 52
Re: 2 prime briskets
« Reply #11 on: July 18, 2015, 01:15:09 PM »
Flat
George - Seguin, TX
Brinkman Trailmaster LE horizontal w/ many mods
6/2015 - SI #3, ET-732 w/ extra meat probe, drain hole enlarged to 1/2"

SuperDave

  • Hero Member
  • *****
  • Posts: 2782
  • Officially Retired
Re: 2 prime briskets
« Reply #12 on: July 18, 2015, 03:02:14 PM »
George, would you cook to those temps again if you were to do another one? 
Model 4, Harrisville, Utah

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: 2 prime briskets
« Reply #13 on: July 18, 2015, 03:06:51 PM »
George, would you cook to those temps again if you were to do another one?

+1

They look fantastic.  I find 200+ dries them out, but maybe that's just my experience.  No more than 195 for me.  The "magic" happens during the stall, imo.  But hey, sure can't dispute those pics!  I hope that beautiful point is going to become burnt ends! ;)
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

FunkedOut

  • Sr. Member
  • ****
  • Posts: 112
  • SI3 Pro Modified
Re: 2 prime briskets
« Reply #14 on: July 18, 2015, 06:28:03 PM »
DAYUM!!!  That smoke ring is beautiful!
Any pink salt in the rub or brine?
How much of what went in the wood box?  Just the oak?
Nicely done.
Joe, in FL
Smoking It #3, Auber PID WSD-1500GPH, 23cfm of boost