Author Topic: Brined Pork Butt for Pulled Pork  (Read 234732 times)

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Brined Pork Butt for Pulled Pork
« Reply #60 on: March 30, 2014, 07:30:40 PM »
Pulled and ready to eat!  OK, the 2 secret ingredients were 1 Tsp. Instacure #1, and 6 oz of Shiner Bock beer.  The #1 salt gave a really nice-looking "smoke ring!" (picture 2).  The meat was very moist and tender, but I found the bark just a little saltier than I like (fam said it was OK, though).  I didn't allow enough for the extra salt in the #1 cure.  Next time, I'll cut the kosher salt to 3/4 cup and leave the meat in no longer than 10-11 hours.

All in all, though, a success!!
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Brined Pork Butt for Pulled Pork
« Reply #61 on: December 05, 2014, 10:44:31 PM »
Update!  I have found the brine to still work, without modification.  Once you brine, you'll never go back to dry!
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

DONF

  • Newbie
  • *
  • Posts: 13
Re: Brined Pork Butt for Pulled Pork
« Reply #62 on: December 09, 2014, 08:31:14 AM »
That is a nice looking smoke ring ------it looks very good
Large Egg -Rec-Tec pellet grill -Cajun grill- Weber Kettle 26.5


Don from Bradenton,FL

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Brined Pork Butt for Pulled Pork
« Reply #63 on: December 09, 2014, 06:44:22 PM »
Thanks, Don.  If you haven't brined a butt yet, you owe it to yourself to try! ;)
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

PhatterMike

  • Jr. Member
  • **
  • Posts: 42
Re: Brined Pork Butt for Pulled Pork
« Reply #64 on: December 09, 2014, 08:18:45 PM »
Tony, Looks great, I found a brining container @ Sam's Club a couple of years ago... Works great, made of hard plastic by Rubbermaid, fits 2 Butts perfectly & fits straight in my refrigerator, I can get 2 of the container's on 1 shelf... I tried to attach a photo but it was too large... lmk if you want me to email it to you.
Keep experimenting, I'm enjoying the forum.. Happy Holidays,
Mike
Mike from Palm Beach Gardens, FL

2-Large BGE's, 1- XL BGE, 1-Mini BGE, Weber Genesis 1100 & Now (as of 10-8-2014), I am proud to say.... 1 Smokin~It Model #4

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Brined Pork Butt for Pulled Pork
« Reply #65 on: December 09, 2014, 08:39:25 PM »
I've seen those containers at Sam's, Mike.  They're in the restaurant supply area at my club.  I usually don't do much larger than one butt at a time, which fits great in the Briner Jr., but I was definitely challenged for a 14 lb turkey!
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

NDKoze

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3008
  • Gregg - Fargo, ND
Re: Brined Pork Butt for Pulled Pork
« Reply #66 on: December 09, 2014, 09:08:27 PM »
Tony, Looks great, I found a brining container @ Sam's Club a couple of years ago... Works great, made of hard plastic by Rubbermaid, fits 2 Butts perfectly & fits straight in my refrigerator, I can get 2 of the container's on 1 shelf... I tried to attach a photo but it was too large... lmk if you want me to email it to you.
Keep experimenting, I'm enjoying the forum.. Happy Holidays,
Mike

For information on how to reduce the size of your pictures, so you can post them check out the following thread:
http://smokinitforums.com/index.php?topic=1272.0

We love to see pictures!
Gregg - Fargo, ND
Smokin-It #3 (purchased in 2014) that replaced a Masterbuilt XL (ugh) and a 10+ Year-Old Big Chief (still used for fish), and few others over the years, along with variety of Weber Gas/Charcoal Grills, Anova Sous Vide, etc. devices.

PhatterMike

  • Jr. Member
  • **
  • Posts: 42
Re: Brined Pork Butt for Pulled Pork
« Reply #67 on: December 10, 2014, 09:09:17 AM »
NDKoze... Thanks for the guidance...
Mike from Palm Beach Gardens, FL

2-Large BGE's, 1- XL BGE, 1-Mini BGE, Weber Genesis 1100 & Now (as of 10-8-2014), I am proud to say.... 1 Smokin~It Model #4

DONF

  • Newbie
  • *
  • Posts: 13
Re: Brined Pork Butt for Pulled Pork
« Reply #68 on: December 11, 2014, 08:23:45 AM »
never brined a butt  (pork) DM butt will give it a shot ,I need to pull the trigger on one of these smokers
Large Egg -Rec-Tec pellet grill -Cajun grill- Weber Kettle 26.5


Don from Bradenton,FL

NDKoze

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3008
  • Gregg - Fargo, ND
Re: Brined Pork Butt for Pulled Pork
« Reply #69 on: December 11, 2014, 09:28:15 AM »
Once you try a brined butt, you won't go back to the old ways. :)
Gregg - Fargo, ND
Smokin-It #3 (purchased in 2014) that replaced a Masterbuilt XL (ugh) and a 10+ Year-Old Big Chief (still used for fish), and few others over the years, along with variety of Weber Gas/Charcoal Grills, Anova Sous Vide, etc. devices.

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Brined Pork Butt for Pulled Pork
« Reply #70 on: December 11, 2014, 06:53:49 PM »
I need to pull the trigger on one of these smokers

Ready, aim...FIRE! ;D
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

cookingdude555

  • Full Member
  • ***
  • Posts: 63
Re: Brined Pork Butt for Pulled Pork
« Reply #71 on: December 11, 2014, 07:04:28 PM »
Anyone try this brine on ribs?  I have a briner bucket, a model #3 arriving tomorrow, and an appetite.
John - Utah

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Brined Pork Butt for Pulled Pork
« Reply #72 on: December 11, 2014, 07:08:26 PM »
I occasionally use it on ribs - works fine.  You just don't want to keep them in for more than about 3 hours, unless you halve the salt.
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!

Barrel99

  • Hero Member
  • *****
  • Posts: 621
Re: Brined Pork Butt for Pulled Pork
« Reply #73 on: December 12, 2014, 12:15:30 AM »
Is there a noticeable taste difference brining ribs?
Arnie near Fort Lauderdale, Florida

Smokin-It #3, Landmann GSM Propane smoker, WEBER kettle, CharGrill Gas BBQ, Brinkman Gas/charcoal combo grill

1-is fun, 2-gets you through, 3-will set you free, 4-and you don't need no more...WAHOOOOOO!!!

DivotMaker

  • Hero Member
  • *****
  • Posts: 10988
  • Model 1, 2D conversion, and 3D!
Re: Brined Pork Butt for Pulled Pork
« Reply #74 on: December 12, 2014, 07:21:17 PM »
Is there a noticeable taste difference brining ribs?

Arnie, that's why I said I use it occasionally.  It does increase the moisture, and seems to make the meat a little more plump, but it's not enough benefit to justify the effort.  Coating the ribs with a rub that contains salt, and resting in the fridge overnight, pretty much accomplishes the same result.  When I do ribs that way, I am very happy with the moisture and tenderness, so I leave the brining to poultry and large cuts that benefit more from the process.
Tony from NW Arkansas
"Official Smokin-It Test Pilot"
Smokin-It Model 1, 2D conversion, and 3D
Auber PID, NexGrill 896 6-burner, CharBroil Big Easy, Anova Precision Cooker w/WiFi
Wife, Son and One REALLY Big Dog!