Smokin-It User Forum!
General Discussions => Mods and Adjustments => Topic started by: airgunhunter on January 01, 2016, 07:01:09 PM
-
Hi there,
Tommy from SC here. I'm a new SI owner. I am interested in the rocker switch conversion with an Auber and I saw a post where someone did a very nice red rocket/missile launcher conversion. There were several pictures in the thread, can someone please help me find the posting?
Warmest regards,
Tommy
-
This should do it for you. Good luck!
http://smokinitforums.com/index.php?topic=1287.0
-
Thank you very much!!!!!!
-
You are very welcome. Keep us posted on your progress.
-
Tommy, very easy to do, just follow all the advice in the thread. The only potentially difficult part is the half inch hole through the stainless-decent bits, pilot hole, oil, slow revs and lots of pressure.I recommend putting the switch/rocket cover between the rheostat and the indicator light. That way you do not have to lengthen the indicator light wire and you leave room to install an external smoke generator on the other side if you want to. I just did this yesterday to the second of my SI3s having done the other one about a year ago. Good luck.
-
Get a bit specifically for stainless steel. Pricey but makes the going easier.
-
Old Sarge and Limey,
Thank you so very much for the recommendations.
Tommy